Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
SPECIFICATIONS
Model
Loudspeaker
Rated Power (RMS)
Power Taps 100 V
Power Taps 70 V
Impedance
Sensitivity
SPL
Freq. Range
IP protection range
Dimension (mm)
Weight
Finish
Accessories
Power selection
INSTALLATION GUIDE
Paso 1 – Fasten A bracket to the wall using 4 screws.
Paso 2 – Attach C to A, lock B to A and fasten screws.
Paso 3 – Select the desired power tab, connect input line cables and cover the
waterproof rubber.
Paso 4 – Screw the two knobs.
Paso 5 – Aim the speaker and fasten the screws to block it.
WCM-32WT / WCM-32BT Version 1.0
At WARNING:
5.25" woofer + 1.42" tweeter
32 W, 16 W, 8 W, 4 W & 2 W
32 W, 16 W, 8 W, 4 W, 2 W & 1 W
312 Ω, 625 Ω, 1250 Ω, 2k5 Ω, 5k Ω & 8 Ω
105 dB at 32 W / 1 m / 1 kHz
190 (width) x 256 (height) x 225 (depth)
1/1
CABINET SPEAKER
WCM-32WT / WCM-32BT
Installation by qualified personnel only.
Speakers must be wired in parallel and connected to
the correct line terminals of amplifier.
Ensure that all speakers have the same polarity with
respect to each other.
Do not select another tapings if the speaker is in use.
No naked flame sources, such as lighted candles,
should be placed on the apparatus
WCM-32WT / WCM-32BT
60 W
90 dB at 1 W / 1 m / 1 kHz
60 ~ 20.000 Hz
IP56
2.6 kg
ABS (White / Black)
Aluminum grille and bracket
U type bracket
Rotary Switch
70 V
100 V
32 W
16 W
32 W
8 W
16 W
4 W
2 W
1 W
-
.
Impedance
Ø
153 Ω
312 Ω
625 Ω
8 W
1250 Ω
4 W
2k5 Ω
2 W
5 kΩ
-
8 Ω
Publicidad
