Master MAC-12F Manual Del Usuario página 2

WARNING
WARNING
WARNING
WARNING
- Before operating always check fan for loose
or damaged parts. Inspect power cord for any
damage. Never use fan if any parts are
damaged or missing. Never use fan without
safety guards attached.
- Operate only on 120 volt 60 Hz (cycle) current
with a minimum of a 15 amp circuit.
12"/20" Floor Fan
12F
20F
30BCT
© 2019, Pinnacle Climate Technologies, Inc.
NEVER LEAVE A FAN UNATTENDED WHILE OPERATING
To Reduce The Risk Of Electric Shock, Do Not Expose To Water Or Rain.
This unit is designed for indoor use only.
Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and regulations.
When servicing or replacing a component requires the removal or
disconnection of a safety device, the safety device is to be reinstalled or
remounted as previously installed before operating this fan.
Use this fan only in the manner intended by the manufacturer. If you have
any questions, contact Customer Service at 800-641-6996.
30" Floor Fan
OR WHILE CONNECTED TO A POWER SOURCE
- When used with an extension cord, use only a
cord of proper size (Amp rating), UL listed, and
with receptacle to accept three prong grounded
plug furnished on the fan's power cord. Always
keep power cord and extension cords away
from heat, oil, and sharp edges. Inspect cords
periodically and replace if damaged.
20" Omni Floor Fan
20FOMNI
36" Cradle Fan
36DCT-BDF
2
24" Barrel Fan
24DCT
High Velocity Fan User's Manual