Electrical Connection; Door Lock; Reversing The Door Swing Of Your Unit; Operating Your Unit - Avanti RF170W Manual De Instrucciones

? Electrical Connection

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
This unit should be properly grounded for your safety. The power cord of this unit is equipped with a
three-prong plug which mates with standard three prong wall outlets to minimize the possibility of
electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
Never use an extension cord to connect power to the unit.
Never use a two-prong grounding adapter.
Where a two-prong wall receptacle is encountered, contact a qualified electrician to have it replaced
with a 3-prong receptacle in accordance with applicable electrical codes.
This unit requires a standard 115/120 Volts A.C.~/60Hz electrical outlet with three-prong ground.
The cord should be secured behind the unit and not left exposed or dangling to prevent accidental
injury.

? Door Lock

Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User's Guide. Insert the key into the lock
and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making sure
metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.

? Reversing the Door Swing of Your Unit

This appliance has the capability of either opening the door from the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please call customer service for reversal instructions.

? Setting the Temperature Control

The unit is designed for refrigerator and freezer combination. You may adjust the temperature control to
select the refrigerator or freezer function according to the purpose of use.
?
To use as a refrigerator, you may set the temperature control dial at the "MAX"
position by turning the knob clockwise from the starting or "OFF" position. After
24 hours, adjust the control to the setting that best suites your needs. Always
align the red dot located over the "OFF" marking with the selected temperature
setting.
?
To use as a freezer, you may set the temperature control dial at the "MAX"
position by turning the knob clockwise from the starting or "OFF" position. After
24 hours, adjust the control to the setting that best suites your needs. Always
align the red dot located over the "OFF" marking with the selected temperature setting.
NOTE: To set dial button, always follow the arrow direction. Never turn dial button counterclockwise (to
the left).
? ?
Warning

OPERATING YOUR UNIT

8