Installation Instructions; General Instructions - Würth V-System Instrucciones De Montaje

GB
Thank you for purchasing this Würth vehicle equipment.
Your new high-quality equipment was crash-tested in accordance with the directive ECE R-17.
Please mount this equipment in accordance with the instructions specified in this manual.
As a matter of principle, we recommend to have your vehicle equipment installed by a certi-
fied installation partner or an authorized company.
This manual is general in nature and it is meant to provide you with helpful information on
mounting and everyday use of the equipment.
We hope you enjoy the daily use of your new Würth vehicle equipment.
Keep the vehicle's centre of gravity at a low level.
■
Consider the load distribution. Store heavy items at the bottom.
■
Observe the admissible overall weight and the axle loads.
■
We recommend to install a partition wall separating it from the driver's cabin.
■
Secure loose items and use load-securing elements.
■
Module height
≤ 980 mm
980 - 1,160 mm
1,160 - 1,430 mm
> 1,430 mm
The use of rivet nuts
increases the corre-
sponding number!
10

Installation instructions

General instructions

Number of mounting points "Side wall"
Mounting points in the
Front area
Mounting points
Rear area
1
2
2
3
"Front"
2
2
3
3
"Rear"