Removing Your Device From The Motorcycle Mount; Mounting Your Device In An Automobile - Garmin zumo 590 Instrucciones De Instalación

2
Tilt the device back until it snaps into place.
3
If the latch on top of the mount stays up after you insert the
device, press it down.
Removing Your Device from the Motorcycle
Mount
1
Press the release button on the side of the mount.
2
Lift out the device.

Mounting Your Device in an Automobile

Before mounting the device, check the local laws pertaining to
windshield mounting.
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Do not use the suction cup mount on a motorcycle.
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
1
Plug the automotive power cable
the mount.
2
Remove the clear plastic from the suction cup.
3
Clean and dry your windshield and the suction cup with a
lint-free cloth.
4
Press the suction cup
back toward the windshield.
5
Snap the cradle onto the suction cup arm.
6
Fit the bottom of your device into the cradle.
7
Tilt the device back until it snaps into place.
8
Plug the other end of the automotive power cable into a
power outlet.
NOTICE
WARNING
into the connector
to the windshield, and flip the lever
on
3