Functional Description - Milwaukee 49-16-2717 Manual Del Operador

• Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
READ AND SAVE ALL
INSTRUCTIONS FOR
FUTURE USE

FUNCTIONAL DESCRIPTION

1. Detent
2. Attachment pole
3. Spool housing
4. Line
3
4
SPECIFICATIONS
Cat. No. ................................................ 49-16-2717
Power Head ............................................... 2825-20
RPM .......................... High 0 - 6200
Cutting Line ............................... 25' x 0.080" spiral
............................... 20' x 0.095" spiral
Replacement Line ......... MILWAUKEE 49-16-2712
2
5. Spool tab
6. Line blade
7. Guard
8. Trimmer head
8
5
6
Low 0 - 4900
or MILWAUKEE 49-16-2713
1
7
US UL Listing for Canada and U.S.
C
WARNING
sembly and use instructions are provided in the
power head manual. Connect the attachment to
the power head in accordance with the power
head manual.
Do not operate the tool without the guard in place.
The guard must be attached properly during use.
Operating the tool without the guard will cause
serious injury.
Always remove battery pack before changing or
removing accessories.
4
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Safety Alert Symbol
Read operator's manual
Always wear eye protection and
use proper personal protective
equipment.
Always wear protective clothing
and footwear.
Wear protective gloves
Keep bystanders 50' away during use.
Objects may be thrown or ricochet in
all directions.
Do not use blades or brush cutting
wheels.
ASSEMBLY
Before use, read manual and labels
of the power head. Important as-