Basic Operation - KlipXtreme Presto KBS-050 Manual De Instrucciones

2. Play button (multifunction button - Play/Pause/Answer/Hang-up):
In playback mode, touch this button to play or pause your music, or to resume
playback when a call has ended. In auxiliary mode, it will mute the audio when the
pause button is pressed.
For hands free mode: press the play button to answer and end a call.
Press and hold if you wish to reject an incoming call.
Press the Play button twice to redial the last number called (on supported devices).
3. The button: Press this button briefly to decrease the volume level. Press and
hold this button to play the previous track. In auxiliary mode, only the volume
command will work.
4. The button: Press this button briefly to increase the volume level (when the
maximum level is reached, the speaker will generate a short beep). Press and hold
this button to play the next track. In auxiliary mode, only the volume command
will work.
5. Power/Mode button: Press and hold this button to turn the speaker on or off. The
unit will automatically shut off after a period of inactivity. Use this button to toggle
among the auxiliary, Bluetooth and tuner operation modes. An audible tone will be
®
heard while cycling through the different modes.
Built-in microphone: Use it for hands-free calling and conferencing.
6. Reset button: Use this button to reset the speaker when it is blocked in the
mode.
Bluetooth
®
7. Aux input jack: Allows the connection of any device equipped with an auxiliary
3.5mm audio connector (for wired playback). The up and down volume
commands in this mode are enabled.
8. USB port (Power bank): Use it as a power bank to charge your devices
whenever you need it. The power bank will charge as long as the speaker is
turned on.
9. DC 5V micro-USB port: Charges the built-in battery of the speaker.
IV. Basic operation
• Use the supplied USB cable to charge your portable speaker directly from your
computer, laptop or AC adapter.
• Make sure that your portable speaker is fully charged before using it for the
first time.
• The battery has to be initially charged for at least 5 hours. Thereafter, it will take
from 3 to 4 hours to recharge.
• While charging, the LED is solid red. When the battery has reached full capacity,
the red LED turns blue.