Philips HR2204 Manual Del Usuario página 8

ENGLISH
10
Caution
• Make sure the content (including liquid) is somewhere between the MIN and
MAX indication inside the jug.
• If the contents go over the MAX indication, the overflow sensor will cause
the alarm signal to activate. Remove some of the contents and restart the
program.
5 Stir the liquid and ingredients (Fig. 13).
6 Hold the motor unit above the jug with both connectors aligned and then lower
the motor unit into the jug (Fig. 5).
7 Put the small plug in the socket of the jug (1) and put the power plug in the wall
outlet (2) (Fig. 6).
8 Press the program selection button to select the desired program (Fig. 7).
9 Press the start/stop button to start the cooking process (Fig. 8).
» The corresponding light goes on and the SoupMaker starts the cooking
and/or blending process (Fig. 9).
» When the program has finished, the appliance beeps, and the light blinks
(Fig. 14).
Caution
• Blades are sharp. Handle carefully. Always unplug the appliance first. Never
touch the blade itself when cleaning or clearing food caught in blades.
• Do not process ingredients such as ice cubes, frozen ingredients or fruits with
stones.
Tip
• To stop the ongoing cooking process, press and hold the start/stop button for
2 seconds.
• If you prefer your soup even finer, or would like to do some blending in your
chunky soup or compote, select the manual blending program. Press and hold
the start/stop button to start blending. To stop blending, simply release the
button.
Note
• The maximum operating time for one manual blending cycle is 30 seconds.
• To better protect the lifetime of the appliance, it is recommended to wait at
least 30 minutes until the appliance cools down before next use.
10 Remove the power plug from the wall outlet and from the appliance (Fig. 15).
11 Hold the handle of the jug with one hand and with the other hand lift the motor
unit off the jug by its handgrip (Fig. 3).
12 You can now pour the soup, smoothie or compote into a bowl (Fig. 16).