Ricoh GF-1 Manual De Instrucciones página 17

Caution
When using bounce flash, the illumination coverage is fixed at
50 mm.
• When the ceiling or walls are too far, the reflected light of the
flash may not be enough and the bounce flash may not be
effective.
• If the ceiling or walls are not white, the reflected light may be
affected, taking their color.
• If the reflected light is attenuated too much and the bounce
flash is not effective enough, select a higher ISO setting on
the camera.
Catch-li ght panel
When using bounce flash, you can also use the catch-light panel
at short distance to direct some of the light at a human subject,
adding a glint in their eyes and brightening their expression.
• When you pull out the wide panel,
the catch-light panel will be pulled
out at the same time. Push the wide
panel back inside.
• When using the catch-light panel, set
the flash head upwards at a 90˚ and
use bounce flash.
Flash compensation
When using Type R cameras, you can compensate the flash
output level using the TTL auto or Ambient light auto mode. For
details, see the Camera User Guide.
1st curtain / 2nd curtain synchronization
For details, see the Camera User Guide.
EN -