ARENDO Milkstar Manual De Uso página 34

5.2 Stirring function (E.g. for cocoa)
1
5
1. Remove the lid of the milk frother.
2. Insert the desired attachment (stirrer or frother).
3. Pour milk into the container. Ensure that you do not exceed the maximum
level:
Frothing 175 ml ("
4. Add the desired mixing powder (e.g. cocoa powder).
5. Close the lid of the milk container and ensure that it is fixed correctly.
6. Place the milk container on the base unit. Connect the power cable to a
properly installed socket.
7. Press the sensor button ("
frother to switch on the appliance.
Press the sensor button ("
mode. An audible signal confirms the selection. And the (
wing in blue on the button (heating plate switched off). If the (
white, then the heating plate is switched on and the content is being heated. The
white LED colour means a longer heating duration.
34
2
6
";) Stirring 250ml ("
") on the front of the base unit of the milk
") on the front of the base unit to select the desired
3
7
").
) symbol starts glo-
) symbol is red or
English
4