USE & OPERATION (CONTINUED)
LOW WATER ALARM
The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the
minimum level, you will hear a beeping sound and the indicator light will flash continuously. The unit
will automatically pause evaporative cooling.
Refill the water tank to deactivate the alarm in Cooling Mode. First switch OFF the unit and unplug
from the electrical socket. Fill the water tank with water above the minimum water level mark. Plug in
and switch ON again.
To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch
the unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low
Water Alarm will sound again if the COOL function is activated while the water tank is still empty.
COMFORT LIGHT
When the unit turns on, the water level indicator located at the front of the water tank will light up to
produce an elegant glow. This can be convenient as a Comfort Light during the night. This light will
remain on for as long as the unit is turned on.
CLEANING & DRAINING THE WATER TANK
WARNING:
Before cleaning the unit, switch the unit OFF and disconnect the power adapter from the unit and
electrical socket.
•
Slide out and empty the water tank.
•
Rinse the water tank with clean water.
•
Carefully remove the Water Tank Filter* (if your unit has this) from the tank. Remove dust and hair
from filter and then rinse with water until clean. Dry and replace the filter back into the water tank.
•
Use a damp cloth to remove dirt and dust from the surface of the unit. Never use corrosive
elements or chemicals to clean this product.
•
When the product is not in use, store the unit in a dry place out of direct sunlight.
*Applicable for models with water filter feature only.
8
EN