INSTRUCTIONS FOR USE & ASSEMBLY
INSTRUCTIONS FOR USE
USING THE CRIB
The crib has wheels on the front of the frame's legs to assist with manoeuvrability. Access the wheels by holding
onto the back of the crib by the railing and raising this latter. At the same time, push the crib either forwards
or backwards. There is a brake on the lower part of the leg to prevent movement when the crib is motionless.
1
brake
2
ADJUSTING THE FRAME
Adjust the leg at the base of the crib by: pressing the button down (as shown) and pulling on the leg to adjust
the length.
TAKE CARE WHEN DOING THIS! Always fully extend the legs when the crib is in use.
1
2
69