Assembling The Pedestal - Panasonic TC-P50G10X Manual Del Operador

■

Assembling the pedestal

Fix securely with assembly screws
Tighten screws firmly.
Pole
R
■
Set-up
Carry out work on a horizontal and level surface.
Tighten screws firmly.
B
Arrow
mark
Pole
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Attaching the pedestal to TV
. (Total 4 screws)
A
A
Pole
L
Front
Base
Bottom view
Rear side
Hole for pedestal
installation
Pole
Fix securely with assembly
screws
Base
Assembly screws
(4 of each)
Poles (2)
Base (1)
. (Total 4 screws)
B
Accessories
A
M5 × 18 (Silver)
B
M5 × 25 (Black)
L
R
or is printed at the
L R
bottom of the poles.
9