Descargar Imprimir esta página

PNI AirFun One IR Manual De Usuario página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
EN
Sleep and wake up
1. In order to prolong lifespan of the battery, when the remote controller is stationary for
more than 20 seconds, it will turn turn off.
Press any key to wake up the remote controller.
2. When low voltage is detected (green light flashing slowly), it will turn off after 20 seconds.
Cursor calibration
It has an automatic calibration function, when the mouse cursor is not accurate or drifting,
you can put it on the desk for two seconds. Calibration is done.
Note: When calibrating, you need to place the remote on a steady surface so the calibration is
done properly.
Speed regulation
This product has five levels of speed
Speed up:
Pressing "OK" and"up"3 seconds (Green light flashes once) will accelerate a level.
Slow down:
Pressing "OK" and"down"3 seconds (Green light flashes once) slows down a level.
LED Indicators
Green Indicator:
1. When the remote controller is well connected, the green indicator will stay on;
2. If the green indicator flashes quicly, the remote is not paired or connected properly.
Check if the receiver is properly connected, or it is covered by metalic objects.
3. If the green indicator flashes slowly, the battery level is low and needs charging. (In this state,
the remote controller will automatically turn off)
Red Indicator:
When the red indicator is on, it means that the remote is charging.
When is fully charged, the red light goes off.

Publicidad

loading