PNI AirFun One IR Manual De Usuario página 5

Infrared learning function and the mode switch
Under 2.4G mode, press the pause button of the mouse for 3 seconds to enter infrared mode
1.
Under infrared mode, press the pause button of the mouse to enter the learning status, then
2.
the green light flashes slowly
Under learning mode, aim the IR LED of the remote you want to copy to the IR LED of the air
3.
mouse, press the respective button of the remote control to learn the IR functions accordingly.
After you learned a button, the green light shall be on, within 5 seconds, press any other button
to learn another key.
Under learning mode, press the pause button of the mouse to exit the learning mode, and
4.
then enter the infrared mode.
Under infrared mode, press the pause button of the mouse for 3 seconds to exit the infrared
5.
mode, and enter 2.4G mode
Note!
Battery: Keep the battery with enough power. When the voltage is low, the stability of mouse
1.
cursor will be affected.
Working Distance: The actual working distance of this remote controller will be affected by
2.
electromagnetic fields. Please make sure the receiver is not covered by metal items.
Pairing: The remote is paired with the receiver by default. This function is useful if you replace
3.
the USB receiver.
EN