Logan LGK4C4CNVRSP1 Manual Del Usuario página 30

Set motion detect area/sensitivity
(Note: The more number, the more sensible, the much easier to detect the move object)
Set motion alarm trigger output
1. Keep Alarm:1-999s available
2. Turn on the Buzzer: NVR will send out buzzer alarm
3. Send to Client: It will send alarm to Client-end
4. Video channel: the Client-end connect with this channel
5. E-mail alert: It will send emails to collection box
6. Send picture in attachment
7. Snapshot, take alarm picture
8. Call PTZ camera preset(Only support PTZ camera)
9. Start record: It will record the selected channels
10. Output Module: It will open alarm for the relative device (normal close)
29