D-Link AirPremier N DAP-2310 Guia De Instalacion página 3

Connecting the DAP-2310 to your network
Connect the power adapter to the receptor on the rear panel of the
A.
DAP-2310 and then plug the other end of the power adapter to a wall outlet
or power strip. The power LED will turn ON to indicate proper operation.
B.
Using an Ethernet cable, insert one end of the cable to the LAN port on the
rear panel of the DAP-2310 and the other end of the cable to a switch.
Note: You can also connect the DAP-2310 directly to the
computer that will be used for configuration. The LAN LED
will illuminate to indicate a proper Ethernet connection.
Computers with 802.11 b/g/n wireless adapters can connect to the DAP-2310.
C.
B. LAN Port
Connects DAP-2310
to a switch or PC.
C. Antennas
Used to broadcast wireless network
and recieve connections from
802.11 b/g/n wireless clients.
D. Reset
Reset the Access Point.
A. Power Receptor
Receptor for Power Adapter.
3