W Orking Instructions; S Ervice /M Aintenance; P Reventive Maintenance - SUHNER ABRASIVE LGS 30 Documentación Técnica

Replace needle with O-ring and spring. Make sure that
the ends of the spring grip (only for the chisel) in the slots
provided.
3.2 w
orKing instructions
Observe even chip removal. Avoid chattering. If the pen
stops at a «dead point» and will not start, it can be set go-
ing by gently tapping the stylus.
4. S
ervIce
4.1 P
reVentiVe mAintenAnce
Even if the machine still operates perfectly, the
motor should be removed and cleaned by a spe-
cialist after approx. 300 to 400 operating hours.
/m
aIntenance
13