B-Speech Duo Plus Operación Manual página 5

Sora_DuoPlus_A4_all.qxp 24.11.2010
Headset BT V. 2.1 Class 2
User Manual
Congratulations
Congratulations on your purchase of the B-Speech® DuoPlus multilink-headset.
This headset allows you to communicate wirelessly through your mobile phone and
includes a built-in microphone and earphone. It uses BT 2.1 and multilink technology,
but is also compatible with mobile phones using version 1.1 technology. Your B-
Speech® DuoPlus headset uses a built-in Lithium Polymer rechargeable battery, with
long life.
Package Contents
• Headset B-Speech® DuoPlus
• 2 Ear hook
• 3 Rubber ear gels
• USB Charger Cable
• User Guide
Headset overview
1. Earhook
2. Volume -
3. Volume +
1
2
4. Earphone
5. Microphone
6. Mulitfunction key
4
7. Status LED
8. Earhook hinge
5
9. Charging port
The headset can be worn
on either ear. Just clip the
ear hook on to the preferred
side.
Charging the internal battery
Before using your headset, please charge the internal battery. To charge the battery:
1. Connect the USB Charger to a USB port.
2. Plug the adaptor's connector into the charging port of DuoPlus
3. While charging, the red LED light will stay on and turn into blue when charging is
complete. You can then unplug the adaptor's connector from the headset and
disconnect the adaptor from the electrical outlet.
4. During normal use you see the red LED blinking, please charge the Headset
5. Charging time is about 2 hours
Switching the headset on or off
To switch on:
Press and hold the multi-function key for 3 seconds until the blue LED comes on.
To switch off:
Press and hold the multi-function key for 3 seconds until the red LED flashes.
Note, if there is no connection with B-Speech® DuoPlus, the headset will switch off
automatically. After switching on , Duoplus will go into auto-pairing mode and con-
nect to the mobiles, which were paired before
Pairing Procedure
Your B-Speech® DuoPlus needs to be paired to your Bluetooth® mobile phone
before it can be used. This is a two part process; one part is carried out on the
headset and the other is carried out on the mobile phone.
Note that different mobile phones use different methods of pairing.
To pair your B-Speech DuoPlus:
1. With your head set turned off, press and hold the multifunction key for 7 sec.
The LED will alternate rapidly between blue and red which indicates that the
head set is in pairing mode.
2. Use your phone's menu to search for Bluetooth® audio devices. The phone
should indicate it has found the B-Speech® DuoPlus headset. Confirm that you
want to pair your mobile phone and headset together. If you are unsure how to go
through the pairing process on your mobile phone, please refer to the user
manual.
3. When asked for a pin key, enter: "0000". Your phone will confirm that pairing has
been successful.
Note that there is usually a time limit to pair devices,
Note for Multi-link use:
In order to pair a second mobile please press the volume - button for 3 seconds,
the LED will alternate rapidly between blue and red, B-Speech® DuoPlus will go into
11/2010 Technische Änderungen vorbehalten! / Technical specifications are subject to change without notice.
15:18 Seite 1
8
6
3
7
9
pairing Mode and you can pair the second mobile. Please proceed with pairing as
described before. To activate the Multi-link-function please press volume -/+ at the
same time for 3 seconds. B-Speech DuoPlus will get into the multilink Mode, the Blue
LED will blink twice.
Phone call use
Making a call from the mobile phone
While your mobile phone is paired with your headset, you can use the mobile phone
to make phone calls in the same way as normal. The only difference will be that the
earphone and microphone functions of the head set will be used instead of the phone's.
Answering a call
to answer a call after a ring tone heard in your headset, simply press the multi-functi-
on key.
Note for Multi-link use:
In Multi-link mode you can hold a running conversation to accept an incoming call
from the second mobile phone and switch between those two phone calls.
During an running conversation with the first mobile phone, double press the multi-
function key to hold the first and accept the second mobile phones call.
The conversation of the first mobile phone will be set to hold. To switch between both
calls, double press the multi-function key again. After the active call is ended, the
hands-free set will automatically switch to the second running call.
Note that you can set your mobile phone to automatically answer calls, which means
you do not even need to press the multi-function key. Please refer to your mobile pho-
ne's user guide for more information about this setting.
Ending a call
During a call, press the multi-function key to hang up. If the other person hangs up
first, then the call will end automatically.
Voice dialling through the headset
In order to use the voice dial feature of your headset, your phone must support voice
dialling and must have voice tags stored. To use voice dialling, the corresponding
voice profiles must be stored I your Phone Your Mobile must also support this functi-
on. Press the multi-function key briefly. You will hear a short tone. Speak the voice tag
immediately. Your phone will make the call.
Last number redial
When the headset is in standby mode (not in conversation), press the volume + key 3
seconds, (tone appear) and your phone will re-dial the last number that you called.
Note: This function only works on Bluetooth® phones that support the Hands-free
profile In the multi-link mode, the number is either the number of the last paired or the
last used mobile.
Transfering a single call
During a call, you can press and hold the Multifunction key for 3 seconds
(a tone appear) , to switch the conversation between the headset and the mobile
phone. Repeat the operation to return.
Note: Please note that your mobile phone have to support this function. If your mobile
phone does not support it please use it to transfer the call back to your headset.
Rejecting Calls
Press the multi-function key for 3 seconds during an incoming phone (a tone will be
heard) call to reject the call.
Microphone Mute
While talking using the headset press the volume + and - twice shortly to mute
the microphone. Repeat the operation to activate the headsets microphone.
Adjusting the volume
• To increase the volume, briefly press the increase volume key.
• To decrease the volume, briefly press the decrease volume key.
Bluetooth® headset specification
• BT Version 2.1 Class 2
• Maximum distance 30 Feet (10 meters)
• Multilink, 2 mobile phones can be used simultaneously
• Typical standby time is up to 100 hours
• Typical talk time is up to 7 hours
• Typical re-charge time is 2 hours
• Battery type: Lithium Polymer rechargeable
Registration and Safety
Certification/General Information
This device bears the CE symbol as specified by the provisions of Directive R & TTE (99/5/EC).
B-Speech hereby declares that this device is in compliance with the basic requirements and other
relevant guidelines and regulations of the1999/5/EC guideline.
You will find the declaration of conformity on the Internet at http://www.b-speech.com.
Note on environmental protection:
After the implementation of the European Directive 2002/96/ EU in the national legal
system, the following applies: Electrical and electronic devices may not be disposed of
with domestic waste. Consumers are obliged by law to return electrical and electronic
devices at the end of their service lives to the public collecting points set up for this pur-
pose or point of sale. Details of this are defined by the national law of the respective
country. This symbol on the product, the instruction manual or the package indicates that
a product is subject to these regulations. By recycling, re-using the materials or other forms of utili-
sing old devices, you are making an important contribution to protecting our environment.