BraunAbility Carony Go Instrucciones De Uso página 37

4. Lock
Push the wheelchair towards the rails
in the vehicle. The covers of the clutch
open automatically. Push until it connects
properly to the vehicle rails. Make sure
the units have been properly connected
by trying to pull them apart.
5. Transfer the seat
Release the seat from the wheel unit by
pulling down the seat release placed at
the front of the seat. Slide the seat over
to the vehicle until it locks in the inner
position. Make sure that the seat release
handle has returned to original position
and that the seat is unable to slide for-
ward. Check this!
6. Lossa underredet
Height adjust to compensate movement
of weight. Release the wheel unit from
the vehicle by pulling up both lock han-
dles. Swivel the seat inside the vehicle/
drive the seat lift up and inside. Engage
the motors. Turn off the power and load
the wheel unit in the vehicle luggage
compartment and secure it.
37
Carony Go
EN