Safety Instructions; General Guidelines; User Manual - Toolland WPST3 Manual Del Usuario

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2.

Safety Instructions

Keep away from children and unauthorised users.
Always wear a suitable dust mask during use.
Always wear protective gloves during use.
Always wear protective eyeglasses during use.
The drill bit and work piece may become extremely hot. Do not touch with bare hands.
Do not use in an explosive atmosphere.
3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
 Protect this device from shocks and abuse. Avoid brute force when operating the device.
 Protect the device against extreme heat, dust and moisture.
 Familiarise yourself with the functions of the device before actually using it.
 All modifications of the device are forbidden for safety reasons.
 Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
 Damage to drills, drill bits, work pieces or any personal injury resulting from the use of this device is not
covered by the warranty.
4. Features

base with holes for secure bench mounting

for drills with 38 mm or 43 mm collar

adjustable drill depth with rule and stop
5. Overview
Refer to the illustrations on page 2 of this manual.
1 base
2 column
3 stop
4 drill holder
V. 02 – 08/08/2016
WPST3/WPST4

USER MANUAL

5
6
7
8
3
lever
lever support
preset bolt
ruler
©Velleman nv