Unitek DELTA 2200 Manual Del Usuario página 16

2.6.4.2 Output Voltage Setting
! Press and hold the main off switch "
" to select the output voltage setting mode
! Press and hold the main on switch " I " for more than 3 seconds to select different output voltage settings.
All Level LEDs off 6th Level LED on
Output =115V(230V) Output =110V(220V)
2.6.4.3 AVR Buck Range Setting
! Press and hold the main off switch "
" to select the AVR Buck Range Setting mode.
! Press and hold the main on switch " I " for more than 3 seconds to select different AVR Buck ranges.
AVR Buck Range mode All Level LEDs off
AVR Buck = +25%
2.6.4.4 AVR Boost Range Setting
! Press and hold the main off switch "
" to select the AVR Boost Range Setting mode.
! Press and hold the main on switch " I " for more than 3 seconds to select different AVR Boost ranges.
AVR Boost Range mode All Level LEDs off
AVR Boost = -25%
2.6.4.5 Energy saving mode
! Press and main off switch " " to select the
energy saving mode.
5th Level LED on 5th, 6th Level LED on
Output =120V(240V) Output =127V(208V)
6th LED on 5th LED on
AVR Buck = +30% AVR Buck = +20%
6th Level LED on 5th Level LED on
AVR Boost = -30% AVR Boost = -20%
! Press and hold the main on switch " I " for more than 3
seconds to select different energy saving modes.
All Level LEDs off 6th Level LED on
UPS in energy saving mode UPS in normal mode
31
2.7 Audible / Visual Indicators
! Audible / Visual Indicators
"
- - -
"
- - -
"
- - -
"
- - -
- - - -
- - - -
- - - -
- - - -
!
Battery Capacity Indicators
LED1 LED2 LED3 LED4 LED5 LED6 Buzzer
" " " "
" " " #
" " #
-
" #
- -
#
- - -
! Load Size Indicators (AC Normal)
LED1 LED2 LED3 LED4 LED5 LED6 Buzzer
"
- - -
" "
- -
" " "
-
"
: LED on
" " " "
-
: LED off
#
: LED flashing
" " " "
X : any status
" " " "
" " " "
! Load Size Indicators
(Backup Mode)
LED1 LED2 LED3 LED4 LED5 LED6 Buzzer
X X X X
X X X X
Buzzer Operating Status
- - - AC buck mode
- - - AC normal
- - - AC boost mode
Beeps
- - UPS fault
continuously
Beeps in every 4
"
- Backup mode
seconds
Beeps in every Backup time over 30
"
-
15 seconds minutes
Beeps in every
"
- Energy saving mode
0.5 second
Beeps
"
- Battery is dead
continuously
Operating Status
Beeps in every 4
#
- Battery capacity=100%
seconds
Beeps in every 4
- - Battery capacity=80%
seconds
Beeps in every 4
- - Battery capacity=60%
seconds
Beeps in every 4
- - Battery capacity=40%
seconds
Beeps in every Battery capacity=20%,
- -
seconds Battery will be running out
Operating Status
- - - Load size 20%
- - - Load size 40%
- - - Load size 60%
"
- - Load size 80%
Load size 100%. UPS full
Beeps in every
" "
load. Remove the non
seconds
critical loads.
Beeps 2 times in Load size = 110%. Remove
" "
every second the non critical loads
Beeps 2 times in Load size =140%. Remove
" "
every 0.5 the non critical loads or UPS
second shuts off in 2 minutes.
Operating Status
Beeps in every UPS full load. Remove
"
X
second the non-critical loads.
Beeps 2 times in UPS overload. Remove
"
X
every second the non-critical loads
within 20 seconds
32