OPERATING CONTROLS
1. RADIO ON/OFF MODE
3. VOLUME Control Λ /AL 1
5. FM ANTENNA
7. TUNING V / MIN
9. SET
11. AM/FM BAND
13. BATTERY COMPARTMENT
15. AL1 radio indicator
17. AL2 radio indicator
AC POWER SUPPLY
•
Insert the plug into a properly installed 230 V, 50 Hz power socket.
•
Ensure that the voltage is the same as that indicated on the model identification
plate.
INSERTING THE BATTERIES (not supplied)
If there is a power cut or the mains plug has been removed from the power socket,
the settings will be retained if the power reserve batteries are inserted.
1. Open the battery compartment on the underside.
2. Insert 2xAAA/LR03 size (or equivalent) batteries to the supply connection.
Please ensure the correct polarity.
3. Close the battery compartment again.
4. If the device is not used for a prolonged period of time, please take the batteries
out in order to prevent leakage of battery acid.
NOTES ON BATTERIES
•
Do not charge the dry batteries.
•
Do not carry the dry batteries with coins or other metallic objects. It can generate
heat if the positive and negative terminals of the batteries are accidentally
contacted by a metallic object.
•
Do not use different types of batteries at the same time.
•
When you replace the batteries, replace all with new ones.
•
When you are not going to use the unit for a long time, remove the batteries to
avoid damage from battery leakage and corrosion.
Instructions for use
2. LED Digital CLOCK Display
4. VOLUME Control V / AL 2
6. TUNING Λ / HR
8. SLEEP
10. SNOOZE
12. MEM (Memory)
14. AL1 Buzzer indicator
16. AL2 Buzzer indicator
English
3