Installation; Installing/Replacing The Lamp - EuroLite TMH-150 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION

Installing/Replacing the lamp

For the installation, you need one HTI 90 V/150 W GY-9.5 lamp.
The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
The lamp life given by the manufacturer must never be exceeded. This is why you need to take notes on the
operational time of the lamp and replace the lamp in time.
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
22/58
Keep exchanged lamp in a protective
container and remove accordingly.
During the operation, the lamp reaches
temperatures of up to 600° C.
Before replacing the lamp, unplug mains
lead and let the lamp cool down (approx.
10 minutes).
During the installation do not touch the glass-
bulbs bare-handed! Please follow the lamp
manufacturer's notes!
Do not install lamps with a higher wattage!
Lamps with a higher wattage generate
temperatures the device was not designed
for. Damages caused by non-observance are
not subject to warranty.
51786400X51NXS_V_1_0.DOC

Publicidad

Tabla de contenido
loading

Tabla de contenido