Alpine EZi-DAB Manual Del Usuario página 7

Main unit (Interface)
The EZi-DAB main unit is usually installed
out of sight, so you may only see cable
extensions enabling you to connect to the
AUX IN and USB sockets.
1 USB
Usually connected to the
supplied USB extension
cable. Connect your iPod
or USB media player to the
extension (or directly) for
playback and charging. Also
used for USB memory stick
software updates.
2 Power In 3 Controller
Connected to your car Connected to the
ignition 12V power EZi-DAB controller.
supply.
4 Line Out (3.5mm) 5 AUX IN (3.5mm)
Audio out (could be Audio in from any
connected to your Head auxiliary audio device.
Unit's AUX IN).
8 Digital Radio Antenna In
Connected to your EZi-DAB
digital radio antenna.
Please make sure ONLY
to connect a dedicated
5V phantom supplied
antenna. Failure to do so
may result in the device
becoming defect.
6 Antenna Out 7 FM Antenna In
Connects to the FM Connects to your
antenna input on your existing FM car antenna
Head Unit if using FM if using FM direct inject.
direct inject.
EN
5