ASSEMBLING AND ADJUSTMENTS
Transport wheels (accessory)
•
Push the aluminium bail (A) towards to the mounting on
the stand.
•
Place the wheel set (B) over the aluminium bail.
•
Insert the bolt (C) and fit the nut. Screw the bolt tight.
Change drill column (accessory)
•
Remove the bolt (A).
•
Gently knock away the axle (B).
•
Loosen the locking screw (C).
•
Remove the drill column from the stabiliser.
•
Unlock the feeder housing. Remove the feeder housing
from the column.
Assemble the parts in the reverse order.
10 –
English