User Manual; Safety Instructions; General Guidelines - Velleman CAMCOLMS1N Manual Del Usuario

Microscopio digital - ampliación 10-200x
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal
of the device after its lifecycle could harm the environment. Do
not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local
recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, do
not install or use it and contact your dealer.

2. Safety Instructions

The white LEDs, which illuminate the microscope target field are very
bright. Do not stare directly into these LEDs as it may damage your
eyes.
The clear plastic distance shell sometimes picks up dirt or toxic material
from a microscopically observed surface. Be careful that this does not
get in contact with the human skin. Always wash carefully or disinfect
as needed.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of
this manual.
The microscope is not waterproof, so keep it dry.
Do not use it in a humid place like bathrooms. A dry environment will
maintain its life to maximum.
Use the microscope only between -5 °C and 50 °C.
Sudden temperature change may form dew inside the microscope. Put it
inside a handbag or plastic bag to slowdown temperature changes.
Do not point Microscope lens to the sun or strong light for a long time.
Powerful light may hurt the light-sensitive electronics.
Avoid touching the lens.
Do not unplug the microscope from USB port when LEDs are on. This
may cause information loss or circuit damage. Please always close the
MicroCapture software and then unplug the microscope.
V. 01 – 17/01/2018
CAMCOLMS1N

USER MANUAL

3
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido