Heat/Cool Jumper Switch - Perel CTH406 Manual Del Usuario

3. Press or
4. Press to confirm and to return to the normal display.
7.9

HEAT/COOL Jumper Switch

The HEAT/COOL jumper is located on the circuit board. Remove the
batteries before switching.
HEAT: the thermostat runs in heating mode.
COOL: the thermostat runs in cooling mode.
8. Cleaning and Maintenance
There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts.
Occasionally wipe with a damp cloth to keep it looking new. Do not
use harsh chemicals, cleaning solvents or strong detergents.
9. Technical Specifications
temperature range .................................. 5 °C - 30 °C
rated power ............................. 230 V~, 50 Hz, 6(2) A
power supply ............................... 2 x AA batteries LR6
size .................................................... 140 x 199 mm
weight ............................................................. 150 g
options
high-energy alkaline batteries....................... LR6
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.perel.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 02 – 23/02/2018
CTH406
to select the comfort or eco mode.
9 ©Velleman nv