5.
Battery
Do not puncture batteries or throw them in fire as they may explode. Do not
attempt to recharge non-rechargeable batteries (alkaline). Dispose of batteries
in accordance with local regulations. Keep batteries away from children.
Insert the batteries to the correct polarity. The clock will automatically start to run.
Remove the batteries if you are no longer using the device or if the device is
6.
Operation
6.1
Switch Off the Clock
6.2
Setting the Calendar
1.
Set the year manually with the numbers located in the numbers compartment. Carefully remove the
unwanted numbers in the year display and insert the desired numbers into place.
2.
Switch off the clock. Adjust the time according to the steps above.
3.
Respectively adjust the day, date and month.
Day adjustment: Turn knob B3 until the desired day is displayed.
Date adjustment: Switch on the date function with switch B2. The date will flip automatically. When
the correct date is displayed, flick the switch to the off position. Repeat this if the date has flipped
past the desired date.
Month adjustment: Turn knob B1 until the desired month is displayed.
6.3
Switch On the Clock
6.4
Setting the Time
1.
Move the minute hand slowly clockwise. At around
11:30, you will hear the internal mechanism run to
indicate that the calendar is ready to run.
2.
After 2-3 seconds, continue to move the minute
hand. At around 12:00, the internal mechanism will
again make some noise to indicate the calendar
runs.
V. 02 – 17/11/2017
WCF1GB/WCF1NL
WARNING
WARNING
left unused for an extended period of time.
Remove used batteries promptly.
4
©Velleman nv