GPO Rydell Radio Manual De Usuario página 8

3. In Main menu. Use the UP/DOWN button to select time setup and
short Press the AUTO SCAN/ENTER to confirm.
4. In Time setup menu , Use the UP/DOWN button to select set clock
and short press the AUTO SCAN/ENTER to confirm
5. In Set clock menu, the hour begin to flash and you can press
UP/DOWN button to set. Press the AUTO SCAN/ENTER to confirm.
6. The minute flashes and can now be set, and then short Press AUTO
SCAN/ENTER button to confirm.
Note: In time setup menu, you can set clock,date,auto update,12/24
hour following the same operation.
Automatical setting
1. In DAB mode, Press the SETUP button until the DAB menu is
shown.
2. Press the UP/DOWN button to select Main menu and short Press
AUTO SCAN/ENTER to confirm
3. In Main menu. Use the UP/DOWN button to select time setup and
short Press the AUTO SCAN/ENTER to confirm.
4. In Time setup menu , Use the UP/DOWN button to select Auto
update and short press the AUTO SCAN/ENTER to confirm
5. In Auto update menu, use the UP/DOWN button to select from radio.
ALARM 1 SETTINGS
1. In FM or DAB mode, Press the SLEEP/SNOOZE/ALARM button until
the Alarms menu is shown.
2. Press the UP/DOWN button to select alarm1 and short Press AUTO
SCAN/ENTER to confirm
3. In alarm detail menu. Use the UP/DOWN button to select time and
short Press the AUTO SCAN/ENTER button to confirm.
4. The hour begin to flash and you can press UP/DOWN button to set.
Press the AUTO SCAN/ENTER to confirm.
5. The minute flashes and can now be set, and then short Press AUTO
SCAN/ENTER button to confirm.
8