Erasing The Memory - Perel Tools CBP1 Manual Del Usuario

15. How to Use the Unit's Memory
The measured blood pressure and pulse rate readings are automatically stored in the unit's
memory. The memory can store up to 128 measurement sets. When full, the oldest readings are
overwritten.
1. Press M to call a previously memorized reading. The number of memorized sets will first
appear. Next, the systolic and diastolic blood pressure, the pulse rate and the date/time will be
displayed in the LCD.
2. Press M to switch between the different sets. The unit will automatically switch off after
approximately 3 minutes or press

16. Erasing the Memory

1. Make sure the unit is switched off.
2. Hold M pressed for 3 seconds to clear all the memorized sets. The number 0 will appear on
the LCD to indicate all sets have been cleared.
17. Maintenance
Storage
• Always store the unit in its original package.
• Remove the batteries when the unit is not in use.
• The accuracy of the cuff-pressure transducers/indicators need to be verified at intervals of one
year.
Cleaning
• Never use an alcoholic-base or solvent agent to clean the device.
• Wipe the device off with a cloth moistened with tap water or a mild cleaning agent. Dry off with
a soft and dry cloth.
• Clean any dirt on the cuff with a moistened cloth and some soap.
CBP1_v2
to switch off.
9 PEREL