the unit or could cause injury to the user!
Remove the device from the USB power source after charging.
FUNCTIONAL OVERVIEW
Charger for 1-2 Li-Ion battery packs (3.6V/3.7V) 26650, 22650,
18650, 18500, 17670,16340, 14500 etc. or 1-2 NiMH battery packs
(1.2V) Mignon AA / Micro AAA
Includes Micro USB cable
Individual charging slot monitoring and charging control
Automatic detection of Li-Ion and NiMH batteries
Charging starts automatically when a battery is connected in the
correct polarity
Microprocessor controlled charging (CC-CV for Li-Ion, 0dV/-dV for
NiMH)
Automatic battery full detection and completion of charging process
Trickle charge function for NiMH batteries
Indication of the charging status via 3 LEDs per charging slot
Indicates batteries inserted with wrong polarity
Operates via 5V DC USB adapter (not supplied)
3 years warranty
OPERATION
To operate the charger, connect the Micro USB connector of the
charging cable to the charger and the USB connector to any USB power
adapter with minimum 1A output current (e.g. your USB charger that
you use for charging your smartphone). After connecting, the device
performs a quick function test, each LED lights briefly.
With this charger you can charge 1-2 Li-Ion, 1-2 NiMH battery or each 1
Li-Ion and 1 NiMH battery at the same time and independently.
For charging the battery, pull back the silver negative (-) contact and
insert the battery in the correct polarity (according to the plus and mi-
nus symbol shown in the charging slot). The microprocessor-controlled
charger detects automatically the inserted battery and its voltage and
chooses the right charging mode. Charging starts automatically and
the charging status of each battery is indicated via 3 LEDs per slot
(see LED DISPLAY).
It is normal for the batteries to become warm when charging. After the
battery is fully charged all 3 LEDs light up permanently. NiMH batteries
are held in a state of trickle charge after they are full.
Deutsch |
English
| Français | Español | Nederlands | Pусский
Svenska | Suomi