baracuda G3 Manual De Usuario página 3

Congratulations on the purchase of your new G3 automatic pool cleaner. Built with proven Baracuda®
technology, the G3 is designed and manufactured for easy installation, and years of carefree operation.
Before installing the cleaner, please take a few moments to become familiar with its components and to
review the items listed under Important Information below.
FlowKeeper™
Valve
Valve Cuff
Important Information
RISK OF SUCTION ENTRAPMENT HAZARD, WHICH, IF NOT AVOIDED CAN RESULT IN SERIOUS
INJURY OR DEATH. Ensure that your vacuum suction fi ttings installed in your pool for connection of
your suction-side pool cleaner are certifi ed as being compliant with applicable safety standards such
as IAPMO SPS 4. Do not block the suction fi ttings with any part or your body. Do not expose your hair,
loose clothing, jewelry, etc. to any suction outlet fi ttings in the pool/spa.
Notice for Vinyl Liner Pools: Before installing your pool cleaner, examine the interior of your pool
carefully. If the vinyl liner is brittle or has stones, wrinkles, roots or metal corrosion in contact with the
underside of the liner, or has damage to the base material or supporting walls, do not install the cleaner
before having a qualified professional perform the necessary repairs or liner replacement. Zodiac will not be
responsible for liner damage caused by a cleaner which is in disrepair, pattern removal from a vinyl
liner, or a cleaner used in a pool having an aged or deteriorated liner. Please see Limited Warranty.
• To help prevent suction entrapment accidents, wall vacuum fittings should have a safety vac lock
installed. Contact your builder or retail pool professional for details.
• Clean the skimmer basket, pump basket and pool filter before installing the cleaner and on a
regular basis thereafter.
• Always disconnect the cleaner from the pool wall or skimmer before cleaning or backwashing the
pool filter. After cleaning or backwashing, let the filtration system run for at least five (5) minutes
before re-connecting the cleaner.
• Remove the cleaner from the pool before chemical or shock treatments. Wait a minimum
of four (4) hours after super chlorination before re-installing the cleaner.
Hose Section
45° Elbow
4-1/2" Connector
Hose
Protector Net
Finned Disc
WARNING
Introduction
Flow Gauge
Hose Weight
Cleaner Body
6 5 4 3 2 1 0
Wheel Deflector
(US/Mexico only)
3