Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DISPLAY
REPEAT
A
B
6. Installation and operation
•
Start the cars' engine and plug the car plug [A] into the 12VDC car
cigar lighter socket. The transmitter starts automatically. If not,
verify the condition of the fuse inside the plug [A] (see §8).
•
Switch on the car radio and search for a free frequency on the FM-
band. Set the same frequency on the transmitter by pressing the
MENU/REPEAT button once followed by the
the MENU/REPEAT button again to store the setting.
•
There are 3 ways to provide music files to the transmitter:
1. using an SD-card. Slide the SD-card in the SD-card slot [C]
(pins facing down).
2. via a USB device. Connect the USB device to the USB connector
[D].
3. through the 2.5mm mini jack. Plug the 2.5mm plug into the mini
jack [E].
•
Set the volume on the transmitter to an average level. Press the
MENU/REPEAT button twice followed by the
20/01/2009
CARSFM1
remote control
switch between SD and USB
scroll between display information: frequency,
equalizer and remaining time
switch between repeat current track and normal
move to previous or next folder
volume up or down
skip to previous or next track
play or pause
fast reverse or fast forward, speed x2, x5 or x10
move to previous or next frequency
jump to stored frequency
set a bookmark
set boundaries for repeat section
5
or
button. Press
or
buttons (7
Velleman
®
Publicidad
Tabla de contenido
