The operating LED will shine green as soon as the charging process
has finished.
You will find information about treating batteries correctly in the
Safety Information Section.
The camcorder offers you the possibility of charging the battery inside
it. Connect the camcorder to a PC by means of a USB cable to do this.
The battery in the camcorder will now be charged in it when it is
switched off.
Inserting and removing an SD/SDHC memory card
Take an SD/SDHC memory card and push it into the
card slot on the bottom of the camera.
Press the memory card into the slot until a click is audible and
then release it, in order to remove it. The memory card will be
pushed slightly out of the slot automatically, so that you will now
be able to remove it.
Locking a memory card
Make sure that the card is not locked if you wish to save photos or
videos on a memory card:
Unlocked
memory card
20
Locked
memory card
SD/SDHC