Presentation - BraunAbility Turny Evo Instrucciones De Uso

28
Turny Evo
Operation

Presentation

Turny Evo has two basic functions: swivel the seat in/out and forwards/backwards move-
ment for comfort. Note that it is not possible to swivel the seat out when the door is
closed, nor is it possible to adjust comfort once swivel out has begun.
The path that Turny Evo follows is preprogrammed by your installation technician. In the
case of faults or deviations from the preprogrammed path, the seat will stop and cannot
be manoeuvred normally. In this event ,Turny Evo loses its position and must be reset
through an emergency operation. Should this occur, follow the instructions for "Emer-
gency operation by hand held control". Once this is completed, Turny Evo will function
as normal again. Contact your installation technician if emergency operation must be
performed often.
In the case of certain electrical faults, emergency operation with the hand held control
will not work. Should this occur, follow the instructions for "Emergency operation with
the emergency operation kit". Always contact your installation technician after a manual
emergency operation to remedy the fault before using Turny Evo again.