Axonics 2301 Manual De Usuario página 42

Troubleshooting scenarios
Issue Presentation Resolution
System Red error
Error light flashes
indicator for 12
is visible seconds then
turns off.
Red error
light is on all
the time.
38
Disconnect Remote Control from
Stimulator; Press "Up" and "Down"
buttons to check if they are stuck;
Reconnect to Stimulator.
If you have 2 programs available, try
switching to the other program.
If issue persists, contact your doctor.
If you have a TS, check to make sure
the Stimulator is connected to the
cable coming from your back. Try to
adjust stimulation on the Remote
Control. If the red light is still on,
call your doctor
If you have a PS, call your doctor.