Introduction; Package Contents; Technical Data - brennenstuhl BW 1201 Manual De Instrucciones

Operating Instructions

1. Introduction

These operating instructions must be read
completely and carefully. They are a component of
your newly purchased, battery-operated water
flow detector and contain important information
concerning its operation and maintenance. All
safety notices are to be observed in the use of this
product. If you have any questions concerning the
use of this product, contact your dealer or our
service office. These operating instructions are to
be kept and must if necessary be passed on to
third parties.

2. Package Contents

Immediately after unpacking, the contents of your
gas detector's package must be checked for
completeness. Also check the detector itself for
proper condition.
1 x water flow detector
1 x 9 volt block battery
1 x operating instructions

3. Technical Data

Device:
Protection class:
Power:
10
water flow detector BW 1201
IP 20
9 volt DC carbon zinc
(IEC 6F22) / alkaline battery
(IEC 6LR61) or MN1604
BW 1201