Disposal / Environmental Protection; Ink Ribbon Cassette - Frama EcoMail Instrucciones De Uso

� Switch off the system and contact your
local service representative.
Important: If you cannot eliminate the fault
after carrying out the procedures recom -
mended above, please contact your local Fra-
ma representative.
9. DISPOSAL / ENVIRONMENTAL
PROTECTION
Packing, accessories and unit should be
recycled in an environment-friendly manner.
Please follow the relevant regulations in your
country.
To aid in recycling plastic components, they
have been specially marked.
Please ensure that you have properly notified
the relevant authorities before disposing of
your equipment. Abide by the regulations of
your postal authorities and your local Frama
sales organisation.
10. SPECIFICATIONS /
ACCESSORIES
• Capacity: Up to 3000 franks per hour
• Max. letter
thickness: 6 mm
• Screen: Touch screen (9.5 7.3 cm)
• Printing
technology: Thermotransfer
• Ink ribbon 1200–3600 franks
cassette: dependent
on postal requirements and
the number of clichés used.
Electronics: Microprocessor controlled
• Electrical data
Voltage: 230 V/50 Hz 110 V/60 Hz
Nominal
current: 0.6 A
Consumption: 140 W
Fusing: 1.25 A
slow blow
(In Germany ensure that overvoltage
protection exists.)
• Dimensions
Depth: 330 mm
Width: 257 mm
Height: 175 mm
• Weight:
• Accessories:
Attention:
Envelopes made from laid or similar
type of paper are not suitable for fran-
king. If you do use these types of en-
velope please print your postage on a
label and not directly on the envelope.
Right to make changes in this document re-
served.
* If so equipped
1.2 A
140 W
2.0 A
slow blow
6 kg
– Mains cable

– Ink ribbon cassette

– Operating Instructions
15