Blue I HydroGuard HG-302 Manual De Uso página 109

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Table 2 displays the operator menu functions and their description and Table 3 displays the menu functions
with the minimum and maximum values for each.
Menu #
1
Cl Set Point1
2
Cl Set Point2
Cl Calibrated to
3
Cl Sensor was
4
Cl low alarm
5
Cl high alarm
6
Cl interval min
7
Cl interval max
8
pH set point
pH Calibrated to
9
pH Sensor was
10
pH low alarm
11
pH high alarm
12
ORP Set Point1
ORP Calibrated to
13
ORP Sensor was
14
ORP low alarm
15
ORP High alarm
16
Temp Set Point
Temp Calibrated to
17
Temp Sensor was
18
Temp Low Alarm
19
Temp High Alarm
20
Turbidity setpoint
21
Turb. High alarm
22
Alarm Delay
23
Flow low limit
24
Flow K-factor
25
Total Alkalinity
26
Total Hardness
27
28
ORP Emergency Mode
29
Language
30
System Reset
Name
shows most recent calibration and sensor value at
shows most recent calibration and sensor value at
shows most recent calibration and sensor value at
Alarm when ORP above this value + Open Cl relays 1+2
shows most recent calibration and sensor value at
Alarm when Turbidity above this value - optional module
TDS
Allows ORP mode to be used if Cl measurement problem
Restarts controller - safer than turning off and on
Table 2: Operator Menu Functions and Descriptions
Description
Controls Cl Relay 1 - On/Off or Proportional
Controls Cl Relay 2 - On/Off only
calibration to aid in troubleshooting
Alarm when Cl below this value
Alarm when Cl above this value
Minimum time between Cl measurements
Maximum time between Cl measurements
Controls pH Relay 3 - On/Off or Proportional
calibration to aid in troubleshooting
Alarm when pH below this value
Alarm when pH above this value
ORP set-point for emergency mode only
calibration to aid in troubleshooting
Alarm when ORP below this value
Controls Temperature Relay 6
calibration to aid in troubleshooting
Alarm when Temp below this value
Alarm when Temp above this value
Controls Turbidity Relay 4 - optional module
Time delay before Alarm Relay 5 closes
Low flow limit for external flow meter
K-factor for external flow meter
Manually entered for Langelier Index
Manually entered for Langelier Index
Manually entered for Langelier Index
Allows choice of language
23

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido