Problem
Appliance not cold
enough
(See "Adjusting the
temperature" on page
8)
Appliance too cold
(See "Adjusting the
Temperature" on
page 8)
No interior light.
Light will not go out
when door is closed
Noise or Vibration
Appliance will not run.
TROUBLESHOOTING
Possible Cause
•
Control set too warm
•
Content temperature
not stabilized.
•
Excessive usage
or prolonged door
openings.
•
Airflow to front grille
blocked.
•
Door gasket not seal-
ing properly.
•
Control set too cold
•
Door gasket not seal-
ing properly.
•
Failed LED light as-
sembly or light switch.
•
Door not activating
light switch.
•
Failed light switch
•
Appliance not level
•
Fan hitting tube ob-
struction.
•
Appliance turned off
•
Power cord not
plugged in.
•
No power at outlet.
21
Remedy
•
Adjust temperature colder.
Allow 24 hours for temperature
to stabilize.
•
Allow temperature to stabilize
for at least 24 hours.
•
Airflow must not be obstructed
to front grille. See "clearances"
on page 4.
•
Replace door gasket.
•
Adjust temperature warmer.
Allow 24 hours for temperature
to stabilize.
•
Replace door gasket.
•
Contact a qualified service
technician.
•
Appliance not level, level ap-
pliance, (See page 4, "leveling
legs"
•
Contact a qualified service
technician.
•
Level appliance, see "Leveling
Legs" on page 4.
•
Contact a qualified service
technician.
•
Turn appliance on. See "Start-
ing your appliance" on page 8.
•
Plug in power cord.
•
Check house circuit.