uniQam Scout Manual De Usuario página 12

Recharging battery
– LCD will show the low battery icon when the battery is too low and
close to the cut off level.
– The camera will save the fi le, if it is recording, and then turn off . Then,
you must recharge your battery.
– It will take about 3.5 hours for full charging by USB.
– You can use an AC charging adapter for quick charging.
– It will take about 2.5 hour for full charging.
1. Turn off the camera.
2. Connect the camera USB port to your computer or AC/DC adapter
via USB cable.
3. Status LED will be turned on and battery recharging will be started.
4. LED will be turned off when it is fully charged.
Smartphone control
– Utilizing WiFi function of uniQam Scout, user can control the camera
through smartphone.
– Compatible with iOS ver. 5.0 or better, Android OS Gingerbread or
better.
– Before connect the camera, download 'uniQam viewer' application
from smartphone app store.
– Search for uniQam viewer' in iPhone App Store or Google Play Store
While smartphone is connected to the camera, camera button operation will be
disabled.
Select all settings of the camera before connect to your smartphone.
'uniQam viewer' features will be upgraded through application update through your
smartphone.
Connect to smartphone
Connect uniQam Scout to smartphone (using uniQam viewer)
Quick setup screen
OFF APP RC EXIT
Description
Turn on 'WiFi' function in uniQam Scout.
Wait 1 min to activate WiFi signal
in the camera. (For the fi rst time connection)
WiFi signal is activated.
WiFi is ready to connect.