Publicidad
Idiomas disponibles
Idiomas disponibles
Stand mixer Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other fluids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly flammable mate-
rials, gases, burning flames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
Main Components and Standard Accessories: Fig.A
1 Accessories mounting shaft
2 Engine lock/unlock lever
3 Speed knob
4 Power Cord
5 Mixing bow
6 Kneading hook
7 Whisk
8 Beater
9 Pot cover
Using the Mixing Bowl
1. In order to lift the arm, clockwise rotation the engine lever. The arm will now move upwards. (FIG1)
2. Place the mixing bowl into its holding device(Step1) and turn the bowl clockwise until it locks into
place (Step 2). (FIG2)
3. Mount the required utensil (Kneading hook or Beater or Whisk) by inserting the top into the
mounting shaft,
and turn anti-clockwise until it locks into place. (FIG3&FIG4)
4. Now fill in your ingredients.
Do not overfill the machine - the maximum quantity of ingredients is 900g.
5. Lower the arm using the engine lever, then place the pot cover into its body (FIG5&FIG6)
6. Insert the plug into a safety power socket.
9
EN
Publicidad
