Maintenance; General Maintenance - Ryobi Tek4 ALLPLAY Manual Del Operador

Ocultar thumbs Ver también para Tek4 ALLPLAY:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MUSIC PLAYER LEDS
See Figure 6, page 10.
Refer to the chart below for LED lights and their meanings.
Music Player Status
Player is off
Music playing
Paused
Low voltage
Linear mode selected
Shuffle mode selected
Player connected to computer
Change play mode
No music loaded into memory
Player is frozen and needs to
be reset*
NOTE: Green LED wil blink once for any key press except HOLD and Power Off.
*If the music player becomes frozen and needs to be reset, remove the battery and wait 5 seconds before reinstalling.
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
STORAGE
Before, storing, always remove the battery pack from the
battery compartment.
 Do not store the music player at temperatures greater than
122º F (such as on a dashboard or vehicle interior).
NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 10 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
Hold Button is Off
Green LED
off
on
on
slow flash
on
on
on
blinks twice when
switching from linear to
shuffle and once when
switching from shuffle
to linear
green and amber LEDs blink alternately in 1 second intervals
LEDs are solid with no button response

MAINTENANCE

BATTERY PACK PREPARATION FOR
RECYCLING
SOFTWARE UPDATES
Occasional updates may be made to the music player software
to improve player performance and/or add compatability with
additional file formats. Please check our website periodically
at www.ryobitools.com for the latest software and instructions
on how to install.
9 — English
Amber LED
Green LED
off
off
off
off
off
off
off
off
WARNING:
Upon removal, cover the battery pack's terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its compo-
nents. Lithium-ion batteries must be recycled or disposed
of properly. Also, never touch both terminals with metal
objects and/or body parts as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
Hold Button is On
Amber LED
off
off
off
on
off
on
off
slow flash
off
on
off
on
on
N/A
N/A
N/A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rp4510

Tabla de contenido