EN
For descaling we recommend the BEEM premium descaler concentrate. The effi cient,
food-safe and environmentally friendly BEEM premium descaler concentrate is
available from selected specialist stockists, via our website www.beem.de or from our
customer service department on request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water reservoir (5) up to the MAX marking (11) with a concentrate/water solu-
tion of no more than 1:20 (one part concentrate to 20 parts water).
2. Turn the control dial (6) to the highest temperature (BOIL) to switch on the device. The
control lamp (8) lights up.
3. As soon as the solution has boiled, turn the control dial down to a lower temperature.
Let the solution take effect for a little while.
4. Allow the solution to run through the discharge tap (9) so that it is also freed of any
limescale residues (see the "Operation" chapter | "Operating the Discharge Tap").
5. To rinse the device, allow two tankfuls of clear water to run through it. The device is
now descaled and ready to be used again.
Storage
Disconnect the device from the mains power when it is not going to be used for a
prolonged period. Clean the device again (see the "Cleaning and Care" chapter) to avoid
possible mould formation. Mould can cause spots and damage on the device that can no
longer be removed / repaired. Allow the device and all accessories to dry completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals.
Technical Data
Article number:
Model number:
Voltage supply:
Power:
Protection class:
Capacity:
07123_DE-EN-FR-ES-IT_A5_V1.indb 34
07123_DE-EN-FR-ES-IT_A5_V1.indb 34
The solution starts boiling.
07123
S2.3.17
230 V ~ 50 – 60 Hz
1500 W
I
max. 3 litres
34
18.06.2018 12:28:07
18.06.2018 12:28:07