BlueStork P2P Sereie Manual De Instrucciones página 39

Quick Install Guide for p2p Bluestork Cameras
The camera's start-up :
1) Screw the WIFI antenna to the back of the camera .
2) Plug the power supply on the mains and on the camera.
3) Plug the camera on your BOX or on yourADSL router thanks to the Ethernet RJ-45
network cable provided.
4) Plug your wired PC on your ADSL router or your BOX with a second Ethernet network
cable (not provided).
Wi-Fi antenna
RJ-45 cable
220V Input
39