Redmond RMC-PM4506A Manual De Usuario página 14

VII. BEFORE CONTACTING SERVICE CENTER
Displayed Error Code
Е1 Pressure switch malfunction.
Е3 Temperature sensor short circuit.
E4 Temperature sensor open circuit.
Е5 The device is overheated.
Problem
The appliance does not switch on.
The device fails to seal hermetically.
Steam escapes from the rim of the lid.
Dish is taking too long to cook.
The packaging, user manual and the device itself shall be taken to the applicable collection point for the recycling of electrical and electronic equipment.
Do not throw away the electronic waste with household trash to help protect the environment.
© REDMOND. All rights reserved. 2015
Reproduction, transfer, distribution, translation or other reworking of this document or any part thereof without prior written permission of the legal
owner is prohibited.
14
Error Description
Unplug the appliance and let it cool down. Close the lid tightly. If this does
not eliminate the error, contact an authorized service center.
Contact an authorized service center.
Contact an authorized service center.
Unplug the device and let it cool down.
Possible Cause
A voltage supply failure.
The sealing ring is missing or improperly positioned.
The sealing ring is dirty.
The sealing ring became deformed.
Voltage supply interruption.
There is an obstruction between the bowl and heating
element.
The bowl is not properly positioned.
The heating element is dirty.
Error Handling
Solution
Check the voltage supply.
Position the sealing ring properly.
Clean the sealing ring.
Replace the sealing ring.
Check the voltage supply.
Remove an obstruction.
Position the bowl properly.
Unplug the appliance and let cool down. Clean
the heating element.