3.14 Service indicator
The control element indicates when service is necessary.
The service interval is based on the total operating hours
of the refrigeration system.
The service indicator does not indicate:
■ malfunction of the system,
■ service necessary based on mileage,
■ annually necessary service.
More information about service is available in
"Service handbook and system data" sup-
plied with the system.
The clock symbol starts flashing when service
is necessary in less than 100 operating
hours.
When the total service interval has passed then the dis-
play shows:
■ "SE" flashing for 10 sec. at start-up,
■ The clock symbol lights continuously.
Fig. 02:
Service necessary
X
Make sure to service the system at a Webasto service
partner.
After the service has been carried out your Webasto ser-
vice partner will reset the service interval counter and
sign the Service handbook.
Frigo Top | Pordoi | Rolle
3.15 Hours of compressor operation
There is a counter (in hours) that saves the compressor
operation hour count. The resolution is 1 hour and the
range goes from 0 to 50.000 hours. Saving interval:
5 min.
X
Press the "Clock" button:
– The compressor operation count, in
hours, appears on the display. The first
value displayed indicates the thousands.
X
Press the "CLOCK" button again:
– The units of the compressor operation
count appears on the display; preceded
by a minus sign.
Example:
If the saved value is 1511 hours of operation, the first
time the button is pressed "001" (thousands) is dis-
played. The second time the "Clock" button is pressed
"-511" (units) is displayed.
Fig. 03:
"Thousands" indication
Fig. 04:
"Units" indication
Repeatedly pressing the "Clock" button toggles between
the two values.
During display of the compressor operating hours only
the "Clock" LED remains on.
When no key is pressed for 3 s, the instrument goes
back to normal display.
The user cannot reset the saved value. Only
Webasto can reset it, using a special reset
procedure.
6