Getting Started - EisSound KBSOUND PREMIUM Manual De Uso

4

2. Getting Started

2.1 The first time...
Installers
The Control Unit must be installed once power is connected for the
first time. By default, the Control Unit
loudspeakers. To program other settings use the installation menu
option 3.2.1. - Mono/Stereo and 3.2.2. - Audio Output.
The +/- keys have multiple functions. The default function is to adjust the
volume. If no key is pressed on the keypad a few seconds after an
operation, the default function resumes.
is set to stereo for 16
W
To turn on, press the ON/OFF key. The display will light up
To select discman/MP3/iPod input for the Control Unit, press
To tune to a station, key in the station frequency followed by
the FM key. For example, to tune to the station at 94.7 MHz
To automatically seek stations
Users
Once the Control Unit has been installed it is ready for normal
operation.
Once the Control Unit is connected to the mains, will remain
powered even if it is in the OFF state. That means that the OFF
state (as indicated in this manual) really means a "standby"
state.
and the icon enabled
CH
To adjust the volume
To select the tuner, press FM
Key Sequence Display Visual
07:18
CH
vol 55
FM
94.70
9 4 7
FM
wxyz ghi pqrs
96.70
FM
95.50
CC-1140-02.1