Keyboard Description; Main Features; Initial Operation - Orbegozo - PG 20 Manual De Instrucciones

PG 20
Please read the following instructions carefully before connecting the timer to electrical appliances.
IMPORTANT
Do not plug a device if it exceeds 16 Amp. Always make sure the device is properly connected to the device.
If you need to clear the timer, unplug it from the mains and wipe with a dry cloth.
Do not immerse the timer in water or other liquid .
Radiators and the like should not be left unattended while running. The manufacturer does not recommend
connecting such devices to the timer .

KEYBOARD DESCRIPTION

- MASTER CLEAR: Clears all data in memory including current time and programs.
- RANDOM: Selects or cancels the random function.
- CLOCK: Pressed with WEEK , HOUR , MIN sets the current time on the device. Select 12 or 24 hour mode
by pressing it with the TIMER button. Enable the daylight saving function by pressing it with the ON /
AUTO / OFF button.
- TIMER : Adjust by pressing it with programs WEEK , HOUR , MIN buttons. Select 12 or 24 hour mode by
pressing it with the CLOCK button.
- ON / AUTO / OFF: Select timer modes .
- WEEK : Set the day of the week by pressing it with CLOCK or TIMER button.
- HOUR : Set the hour by pressing it with CLOCK or TIMER button.
- MIN: Set the minutes by pressing it with CLOCK or TIMER button.
- RST / RCL : Cancel the programs.

MAIN FEATURES

- Up to 10 programs.
- Three modes : Manual, Auto, and Off .
- Selectable mode 12/24 hours.
- LCD display with seconds .
- Available daylight saving function .
- Random function with random operation of 10-31 minutes between 6:00 PM to 6:00 PM.
- 16 combinations of days or sets of days available as follows:
MO
TU
WE
TH
FR
SA

INITIAL OPERATION

- Plug the timer into an outlet 230 v turn. Leave about 14 hours for the battery to charge.
- Delete all current information by pressing the MASTER CLEAR button with a pointed object such as a pen
or pencil after loading.
- The timer is now ready to be programmed for use.
SETTING THE ACTUAL TIME
1. Press and hold CLOCK button, simultaneously press the WEEK button until the current day is displayed.
Continue pressing the HOUR or MIN button until the current time or on-screen minutes. The WEEK, HOUR
or MIN buttons can be held down for faster progress.
2. Release the buttons. The time and day of the week will be set.
3. To reset incorrect time, repeat the above steps.
DIGITAL TIME SWITCH – PG 20
INSTRUCTION MANUAL
SU
MO, TU, WE, TH, FR, SA, SU
MO, TU, WE, TH, FR
SA, SU
MO, TU, WE, TH, FR, SA
MO, WE, FR
TU, TH, SA
MO, TU, WE
TH, FR, SA
MO, WE, FR, SU
ENGLISH
4